Quill & Pad
  • Home
  • Articles
  • About
  • Glossary
  • Contact
  • Click to open the search input field Click to open the search input field Search
  • Menu Menu

Two faces, Two dials, Two identities

High performance escapement with
“triple pare-chute” protection

Limited edition of 10 pieces

The Schmidt List: Signature Movement Screws – Reprise

by Ryan Schmidt

The components of a mechanical watch movement are little more than a series of springs and wheels, held together by plates and/or bridges. No matter the configuration, complication, or finish, the ensemble is secured by the humble movement screw.

Although the movement screw is among the more ubiquitous of horological components, its simple properties and purpose don’t offer the watchmaker an abundance of opportunities to demonstrate their creativity and flare. Nevertheless, etching creativity and flare into some of the most obscure and unexpected places is what some of the best watchmakers seek to do; and so, it’s a pleasant surprise that several have boldly ventured beyond thread and slot to reimagine the movement screw.

This installment of the Schmidt List covers a handful of particularly unusual movement screws. And by “movement screw,” I refer to the screws found within the watch case, not upon it.

However, before we jump into the exotica let us first satisfy the conservative purist by considering the classic screw.

Ultimate classic slotted screw

It’s hard to imagine a purer movement screw than one made according to the George Daniels method of watchmaking. The heat treatment of such a screw gives rise to a purple hue, and the gentle curvature of the head is delectable. Of all these “Daniels” screws, the extra-tall balance cock screw, found on the Daniels Anniversary Watch movement among others, is king.

Daniels Anniversary Movement balance cock screw

Note the classic balance cock screw in the Daniels Anniversary Watch movement

The collaborative project known as Le Garde Temps – Naissance d’une Montre brought watchmakers Robert Greubel, Stephen Forsey, and Philippe Dufour together to instill in one pupil, Michel Boulanger, the dying art of traditional watchmaking by hand. The first fruit of their labor was the “School Watch,” a magnificent living documentary of the techniques.

No longer a prototype, the production version of Naissance d’Une Montre, Le Garde Temps on display at SIHH 2016

The production version of Naissance d’Une Montre, Le Garde Temps on display at SIHH 2016

Unsurprisingly, the Le Garde Temps contains a host of exemplary components, but let’s just take a moment today to admire that tourbillon cock screw.

Like the Daniels Anniversary Watch screw, it stands tall and proud, but in the School Watch it is perhaps even more special as it is the only heat-tempered screw on the watch, the deep blue accent resonating with the hands of the main dial and subsidiary seconds. Unlike the Daniels, it doesn’t have a large cylindrical head, instead featuring a more regular head with a collar further down its shank.

There are other blued movement screws that equally catch the eye, not because they stand tall but because they sit wide and deep within a beautifully chamfered countersink.

F.P. Journe Tourbillon Historique T30 tourbillon bridge

F.P. Journe Tourbillon Historique T30 tourbillon bridge

It’s hard to imagine a better example than that seen behind the hinged case back of the F.P. Journe Tourbillon Historique T30. Five giant blued screws secure the bridges for the tourbillon, the twin spring barrels, and the center wheel. The proportions of these beautiful oversized screws are further exaggerated by a sprinkling of tiny screws for the chatons and other components.

Voutilainen Vingt-8 movement details

The strong shine of classic screws on the Voutilainen Vingt-8

Finally, if it’s a strong shine you seek from a classic screw, you might prefer yours not to be tempered. When combined with the large frosted or striped plates of a manually wound movement, a set of well-polished screws can become decorative highlights. Take the superbly polished and chamfered screws on a Voutilainen Vingt-8, including the very large ratchet wheel screw that is visually beaten only by the oversized 2.5 Hz balance.

Cross-slot screw

While commonly used in our everyday lives, it’s surprising that cross-slot screws are rarely featured in watches. And so they certainly jump out when MB&F presents two large polished cross slots holding the sapphire crystal tourbillon bridge of the LM1 Silberstein.

Close up look dial side of the MB&F LM1 Silberstein in red gold with frosted

Check out the large cross-slot screws holding the visible sapphire crystal bridge on the MB&F LM1 Silberstein in red gold with frosted “dial” (actually the movement’s top plate)

A mix between a true cross-slot and a Phillips screw, these two beauties are the perfect addition to an already quirky mechanical design.

I liken it to a strong tartan pattern on a tweed jacket.

Triple-slot screw

From the foundation of a basic single-slot screw, the simplest way to upgrade is to cut two parallel slots on either side of the functional one. In doing so, the surface achieves a somewhat sporty and contemporary aesthetic. The triple-slot screw can be found on the ratchet wheels and intermediary winding wheels of some of the most pioneering of contemporary movements, from the HYT H2 Tradition to the Angelus U20 Ultra-Skeleton Tourbillon.

U20 Ultra-Skeleton Tourbillon by Angelus

Look closely to see the triple-slot screws on the intermediary winding wheels of the U20 Ultra-Skeleton Tourbillon by Angelus

But the triple-slot buck stops with Dominique Renaud’s staggering DR01. More of a mechanical sculpture than a movement, the DR01 features a revolutionary escapement housed within truly avant-garde architecture.

Dominique Renaud’s DR01

The triple-slot buck stops here: Dominique Renaud’s staggering DR01

It’s easy to overlook the two triple-slot screws among some of the most unusually presented and seemingly alien mechanics.

* Update February 1, 2018: Thank you to the numerous attentive readers for pointing out in the comments below that the triple slot is not primarily an aesthetic choice, but rather indicates that the screw is reverse threaded and requires unscrewing in a clockwise direction, e.g. mainspring barrels.

Curved-slot screw

Surveying the spokes, bridges, and plates of a watch by Romain Gauthier, one might notice an absence of straight lines. Instead, the contours of every structural and aesthetic element flow in sympathy with the wheels and rotors beneath, a strong sign that the movement has been designed and built in-house from the ground up.

It’s particularly apt, therefore, that Romain Gauthier should extend this approach even to his screws.

Movement detail: winding system and power reserve

Do you see the curved-slot screws on the winding system and power reserve of the Romain Gauthier Logical One?

The Romain Gauthier curved-slot screw (or “coffee bean screw,” as I call it) is visually refreshing and simple yet deceptively harder to execute than one might first think. That combination is a great reason for a master watchmaker to further forge his identity into each component, the accumulated effect exceeding anything that could be mimicked by competitors with an appetite for corner-cutting.

Perhaps more applicable to an exotic case screw, there is also a security angle to such a move: exotic screws often require bespoke drivers to be built. A friend once showed me a listing for a particularly rare watch being offered for a staggering discount on the market value – a quick pinch of the screen revealed that a “watchmaker” had decided to service the piece and heavy-handedly opened it with a slotted driver, mashing the slots of the exotic case screws. Buyer beware!

Hex-socket screw

Venturing further beyond the simple slot, some screw heads are carved out, leaving behind a geometric socket and requiring a similarly shaped key to turn it. Such is the case with the hex-socket screw, which is used to secure some very unusual wheels, plates, and dials in HYT’s liquid-indicating H4.

HYT H4 Alinghi on the wrist

The hex-socket screws are front and center on HYT’s H4 Alinghi (the time shown here is 5:58)

The hex-socket screw has a utilitarian feel to it: the surface is not used to showcase impeccable finish, but instead to evoke the spirit of advanced engineering.

It may also trigger flashbacks of flat-packed furniture, but fortunately the H4 comes pre-fabricated!

Inverse spline screw

Most commonly found adorning the cases of Richard Mille’s creations, there are some occasions that the inverse spline screw is used on the movement, such as the RM 67-01. Instead of cutting a spline slot into the screw heads, the edges are cut to produce an inverse (or male) spline.

Richard Mille RM 67-01 movement side

The movement side of Richard Mille’s RM 67-01 showcases the movement’s inverse spline screws

It’s another utilitarian effect that no doubt requires some equally utilitarian tools to be developed by the watchmaker in order to screw and unscrew.

Reticle crosshair screw

The final screw is the reticle crosshair. So close to being a simple cross-slot screw, the reticle crosshair is certainly not simple.

Christophe Claret X-TREM-1

Christophe Claret X-TREM-1

Resembling the view of a high-tech rifle crosshair, Christophe Claret uses this screw to hold in place the plates and winding gears of the X-TREM-1.

Venn screw

Found on many case backs of MB&F’s Horological Machines, the HM4 is one of the few to use these screws on the movement. Effectively just three overlapping holes cut into the head, and reminiscent of a three-set Venn diagram, this screw evokes the kind of playfulness that runs deep throughout the brand.

Elegant MB&F HM4 balance cock

The elegant MB&F HM4 balance cock is held by Venn screws

I would imagine the Venn screwdriver is rather a tough one to create.

Bonus: case screws that just have to be mentioned!

Although this particular Schmidt List was dedicated to the movement screw, one cannot pass this close to the topic of the case screw without being pulled in by its strong gravity.

Here are some of the most notable case screws that have not yet found their way into a movement.

Audemars Piguet Royal Oak bezel screw (nut/bolt?)

And now, deep within the tail end of an unrelated article, it’s time to answer an age-old question: are these really screws?

Audemars Piguet Royal Oak Ceramic Perpetual Calendar

Audemars Piguet Royal Oak Ceramic Perpetual Calendar: are these really screws?

The answer is “no”: they are slotted bolts.

Although Audemars Piguet refers to them as hexagonal screws, they are bolts because a) they do not turn, b) they have threading along the full shank, c) the shank is not tapered, and d) because the bolts engage with receiving screws/nuts on the other side.

Back in 2012, Walt Odets deconstructed a Royal Oak and concluded that they were screws, but this appears to be a conclusion drawn by the presence of a slot and not the other information listed above. Audemars Piguet apparently referred to them as hexagonal nuts back then, so they themselves seem a little unsure of the identity of these iconic components.

While Odets likened the concept of Royal Oak case bolts without threads to a queen without her crown, their threads are nevertheless redundant as the bolt is held from rotation by the countersinks in the bezel. Were they rounded and free to rotate, we would be back into screw territory. But it’s my opinion that the redundant slot is the only ambiguity in what is otherwise a bolt.

Hublot bezel screw

It might well be because Gérald Genta designed the Royal Oak within a matter of high-pressured hours that there is ambiguity as to its exact inspiration. The general understanding is that it was named after the HMS Royal Oak. But the bezel was not based on a porthole (hublot in French), but rather a diving helmet.

That may be the case, but make no mistake here: the Hublot Big Bang was inspired by a porthole (the French word hublot means “porthole”).

Close up look at the dial of the Hublot Big Bang Unico Sapphire Usain Bolt Only Watch 2017

Hublot Big Bang Unico Sapphire Usain Bolt Only Watch 2017: those bezel screws, though . . .

This porthole may hold a passing resemblance to the Royal Oak bezel, but unlike the Royal Oak’s nuts and bolts, those are bezel screws. They are turned at their head to affix to a receiver. With the Royal Oak it is the receiver that is turned from its head on the case back.

The Hublot Big Bang receiver has two female ends to receive a set of screws from the front and back.

It’s a powerful aesthetic, but what makes the screws particularly special in my opinion is the subtle “H” that is formed by interrupting the slot in the middle. It’s a double-protected screw, conveying some intellectual property and requiring a two-pronged driver to manipulate it.

Pig-nose / spanner-head screw

Common to the case backs of watches from Kari Voutilainen and Greubel Forsey, the pig-nose screw can also resemble a pair of wide eyes or, in the right lighting, a yin and yang symbol.

Greubel Forsey GMT Earth caseback screws detail

Greubel Forsey GMT Earth case back screws

Voutilainen Vingt 8R movement detail

Voutilainen Vingt-8R case back screws

In the case of Voutilainen, the design echoes that of the crown wheel, which is held down by two small screws.

F.P. Journe’s tri groove

F.P. Journe case backs are held in place with the tri-groove screw. That is exactly the sort of security you need for a complicated 18-karat solid pink gold movement.

Gold movement of the F.P. Journe Chronomètre à Résonance

Gold movement of the F.P. Journe Chronomètre à Résonance

In this series Ryan Schmidt, author of The Wristwatch Handbook, delves deep into horology to uncover, explain, and celebrate the unusual and the exceptional in the world of watches. For more of Ryan’s articles, please see www.quillandpad.com/author/ryan-schmidt.

*
This article was first published on February 28, 2018 at The Schmidt List: Signature Movement Screws.

You may also enjoy:

The Schmidt List: Top 5 Funky Clicks

The Schmidt List: 5 Extraordinary Balance Wheels

Here’s Why: Stainless Steel Is The Most Precious Metal

Understanding Resonance, Featuring The F.P. Journe Chronomètre à Résonance, Armin Strom Mirrored Force Resonance, And Haldimann H2 Flying Resonance

2 replies
  1. Shirl
    Shirl says:
    June 14, 2020 at 6:31 pm

    Love this, fascinating trivia that delve into beautiful movements and the tiny elements that may slip by our scrutiny. Excellent illustrative photography. Please bring us more articles like this Mr Schmidt. Thank you.

    Reply
  2. Marian Barbu
    Marian Barbu says:
    June 15, 2020 at 12:09 pm

    It’s very interesting and fascinating. But also all of the examples you give very expensive and unaffordable. When they are going to find procedures to make these complications affordable? So far Tissot make complications that are very good quality and affordable. Thank you!

    Reply

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Categories

  • Watch Brands & Horology
    • New for 2025
    • New for 2024
    • New for 2023
    • Affordable Luxury
      • Swatch
      • Ball Watch
      • Louis Erard
      • Gorilla Fastback
      • Ikepod
      • Oris
      • Reservoir
    • Auctions
    • Behind the Lens
    • Boutiques
    • Collectors and Collecting
    • Events, Fairs & Exhibitions
    • Give Me Five!
    • History
    • Quill & Pad
    • Round Table
    • The Naked Watchmaker
    • Thoughts & Opinion
    • Video
    • WatchCharts
    • Wrist Watching
    • A. Lange & Söhne
    • AHCI
    • Akrivia
    • Andersen Genève
    • Alexandre Meerson
    • Andreas Strehler
    • Angelus
    • Antoine Martin
    • Antoine Preziuso
    • Armin Strom
    • Arnold & Son
    • Audemars Piguet
      • Royal Oak Offshore
    • Bélier
    • Bell & Ross
    • Blancpain
    • Bovet
    • Breguet
    • Bremont
    • Breitling
    • Bulgari
    • Carl F. Bucherer
    • Cartier
    • Chanel
    • Chopard
    • Christiaan Van Der Klaauw
    • Christophe Claret
    • Chronoswiss
    • Clocks
    • Corum
    • Cyrus
    • Czapek & Cie
    • De Bethune
    • de Grisogono
    • Derek Pratt
    • Dior
    • Divers' Watches
    • Eberhard
    • Emmanuel Bouchet
    • Fabergé
    • Ferdinand Berthoud
    • Fiona Krüger
    • F.P. Journe
    • Franck Muller
    • Garrick
    • Gérald Genta
    • Girard-Perregaux
    • Glashütte Original
    • GoS
    • Graff
    • Graham
    • Greubel Forsey
    • Grieb & Benzinger
    • Grönefeld
    • H. Moser & Cie
    • Habring2
    • Hajime Asaoka
    • Harry Winston
    • Hautlence
    • Hermès
    • Hublot
    • HYT
    • Independents
    • IWC
    • Jaeger-LeCoultre
    • Jaquet Droz
    • Jean Daniel Nicolas
    • Jean Dunand
    • Kari Voutilainen
    • Kees Engelbarts
    • Kobold
    • Konstantin Chaykin
    • Kudoke
    • Ladies watches
    • Lang & Heyne
    • Laurent Ferrier
    • Linde Werdelin
    • Louis Moinet
    • Louis Vuitton
    • Ludovic Ballouard
    • Manufacture Royale
    • Maurice Lacroix
    • MB&F
    • McGonigle
    • Ming Watches
    • Montblanc
    • Moritz Grossmann
    • Nomos Glashütte
    • Ochs und Junior
    • Officine Panerai
    • Omega
    • Parmigiani
    • Patek Philippe
    • Paul Gerber
    • Philippe Dufour
    • Piaget
    • Pocket watches
    • Rebellion
    • Ressence
    • RGM
    • Richard Mille
    • Roger Dubuis
    • Roger W Smith
    • Roland Iten
    • Rolex
    • Romain Gauthier
    • Romain Jerome
    • Sarpaneva
    • Schwarz-Etienne
    • Seiko
    • Silberstein
    • Singer Reimagined
    • Soviet / Eastern Europe watches
    • Speake-Marin
    • Struthers
    • Tag Heuer
    • Tudor
    • Tutima
    • Ulysse Nardin
    • Urban Jürgensen
    • Urwerk
    • Vacheron Constantin
    • Van Cleef & Arpels
    • Vianney Halter
    • Vintage
    • Wempe Glashütte
    • Zenith
  • Luxury, Experiences, Science & Nature
    • Arts
    • Book reviews
    • Cars
      • Porsche
    • Fashion & Grooming
    • Jewelry
    • Nature
    • Photo Captions
    • Photography
    • Science
    • Shoes
    • Sports
    • Technology
    • Travel
    • Wining, Dining and Cigars
    • Writing instruments
      • Caran d’Ache
      • Grayson Tighe
      • Montblanc
      • Montegrappa
  • General
    • Featured
    • Highlights
© Copyright - Quill & Pad - Enfold Theme by Kriesi
Scroll to top Scroll to top Scroll to top
We use cookies on our website to give you the most relevant experience by remembering your preferences and repeat visits. By clicking “Accept”, you consent to the use of ALL the cookies.
Do not sell my personal information.
Cookie SettingsAccept
Manage consent

Privacy Overview

This website uses cookies to improve your experience while you navigate through the website. Out of these, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may affect your browsing experience.
Necessary
Always Enabled
Necessary cookies are absolutely essential for the website to function properly. These cookies ensure basic functionalities and security features of the website, anonymously.
CookieDurationDescription
cookielawinfo-checkbox-analytics11 monthsThis cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Analytics".
cookielawinfo-checkbox-functional11 monthsThe cookie is set by GDPR cookie consent to record the user consent for the cookies in the category "Functional".
cookielawinfo-checkbox-necessary11 monthsThis cookie is set by GDPR Cookie Consent plugin. The cookies is used to store the user consent for the cookies in the category "Necessary".
cookielawinfo-checkbox-others11 monthsThis cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Other.
cookielawinfo-checkbox-performance11 monthsThis cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Performance".
viewed_cookie_policy11 monthsThe cookie is set by the GDPR Cookie Consent plugin and is used to store whether or not user has consented to the use of cookies. It does not store any personal data.
Functional
Functional cookies help to perform certain functionalities like sharing the content of the website on social media platforms, collect feedbacks, and other third-party features.
Performance
Performance cookies are used to understand and analyze the key performance indexes of the website which helps in delivering a better user experience for the visitors.
Analytics
Analytical cookies are used to understand how visitors interact with the website. These cookies help provide information on metrics the number of visitors, bounce rate, traffic source, etc.
Advertisement
Advertisement cookies are used to provide visitors with relevant ads and marketing campaigns. These cookies track visitors across websites and collect information to provide customized ads.
Others
Other uncategorized cookies are those that are being analyzed and have not been classified into a category as yet.
SAVE & ACCEPT